These exterior MR16 recessed inground up lights are a great choice for outdoor lighting. They operate on an input voltage range of 12 - 25V DC/AC and require external control gear. The faceplate is made of solid brass, while the housing is aluminium. The lamp holder is for MR16 globes (max. 20W), but the globe is not included. A plastic sleeve (must - be installed) comes with the product. The fitting slides and screws into the sleeve. There's a 950mm cable included. The 8mm tempered glass can bear a max load of 600kg. With an IP67 rating, it offers high - level protection. It also comes with a 2 - year replacement warranty. Note: Must be installed by a licensed electrician. Use circular cable in the junction to maintain the IP rating. Choose a product with an appropriate IP rating for your intended use to avoid issues.
Using these inground up lights is quite easy. First, make sure you have a licensed electrician install them as required. The product comes with a plastic sleeve that you must install. Slide and screw the fitting into the sleeve. Connect the included 950mm cable. For the connection, use circular cable in the junction to keep the IP67 rating. If you're doing parallel or single connection, use an appropriate IP68 connector. The lights work with an input voltage between 12 - 25V DC/AC. The lamp holder can take MR16 globes up to 20W, but you'll need to buy the globe separately. The 8mm tempered glass can handle a max load of 600kg, so you don't have to worry too much about heavy objects on it. To keep the lights in good shape, check the connections regularly. And always ensure the IP rating is suitable for where you're using the lights to avoid warranty problems. If anything goes wrong, you have a 2 - year replacement warranty.
