These GALTRI recessed downlights are a great lighting solution. They operate on 220 - 240V AC 50/60Hz and come with a remote - dimmable driver. The housing and heatsink are made of plastic and aluminium, while the diffuser is frosted PC and the faceplate is PBT. With a power factor of 0.9, they offer efficient performance. You can easily change the colour temperature between 3000K, 4000K, and 5700K in one fitting. The GALTRI01A - 02A has a CCT switch on the driver. Using SMD2835 LED chips with a CRI of 80, they provide high - quality light. The 600mm flex and plug are included. They can work in an ambient temperature range of - 20 to 40°C, are suitable for dimming and 2 - way switching, and have an IP44 rating and IC - 4 rating. They are also suitable for use with sensors and come with a 3 - year replacement warranty. Must be installed by a licensed electrician. Tested and recommended dimmers include CLA: VELA, CLIPSAL: 32E450TM & 32ELEDM, HPM: CAT400T, and DIGINET: MEDM & MMDM/RT. Check with a licensed electrician for min and max dimmer load.
Using these GALTRI downlights is easy. First, make sure to have a licensed electrician install them according to the instructions in the product box. Once installed, you can use the remote - dimmable driver to adjust the brightness. To change the colour temperature, use the CCT switch on the driver for the GALTRI01A - 02A model. When using sensors, connect them properly as per the guidelines. Keep in mind that the lights work best in an ambient temperature between - 20 and 40°C. For maintenance, clean the frosted PC diffuser and PBT faceplate gently with a soft cloth. If you encounter any issues, refer to the 3 - year replacement warranty. Also, always check with a licensed electrician for the correct dimmer load when using dimmers.
