These exterior MR16 recessed inground up lights are a great choice for outdoor lighting. They operate with an input voltage range of 12 - 25V DC/AC and need external control gear. The faceplate is made of solid copper, and the housing is aluminium. The lamp holder is MR16, suitable for a max 20W globe (globe not included). A plastic sleeve (must - be installed) and a 950mm cable are included. The fitting slides and screws into the sleeve. It features 8mm tempered glass with a max load capacity of 600kg and has an IP67 rating. There's a 2 - year replacement warranty. Remember, it must be installed by a licensed electrician, and installation instructions are in each box. Use circular cable in the junction to maintain the IP rating, and for parallel and single connections, an appropriate IP68 connector is recommended. Ensure the IP rating suits your intended use to avoid issues.
How to use: First, make sure to install this light by a licensed electrician following the instructions in the box. Slide and screw the fitting into the plastic sleeve that comes with the product. Connect it to a power source within the 12 - 25V DC/AC range using the provided 950mm cable. Use circular cable in the junction to keep the IP rating intact. For parallel or single connections, an appropriate IP68 connector is a good choice. Note: Always ensure the IP rating of this product matches your intended use to avoid warranty problems. Maintenance: The 8mm tempered glass can handle a max load of 600kg, but try to avoid heavy impacts. Periodically check the connections and the plastic sleeve for any signs of wear or damage. If any issues arise, refer to the 2 - year replacement warranty.
