This is an exterior surface - mounted bollard light. It has an input voltage range of 12 - 24V. The housing is made of aluminium and acrylic. The lamp holder can fit 1xMR16 (Max 20W), but the globe is not included. External control gear is required. It has an IP rating of IP54 and comes with a 2 - year replacement warranty. It must be installed by a licenced electrician, and an installation instructions sheet is in each product box. These bollards are for mounting on solid surfaces like concrete paths or sturdy timber decks. Use circular cable in the junction to maintain the IP rating. For parallel and single connection, an appropriate IP68 connector is recommended. It's not suitable for harsh weather or heavy rainfall areas unless protected; IP65 fittings are better for such places. Make sure the IP rating fits your needs to avoid warranty issues.
Using this bollard light is easy. First, make sure you have a licenced electrician to install it as required by the warranty. The light works with an input voltage between 12 - 24V, so ensure your power source meets this range. Since the globe is not included, you'll need to buy a 1xMR16 (Max 20W) globe separately. And don't forget the external control gear, as it's necessary for the light to function. When installing, mount it on a solid surface like a concrete path or a sturdy timber deck. To keep the IP54 rating, use circular cable in the junction. If you're doing parallel or single connections, use an appropriate IP68 connector. Avoid using it in harsh weather or heavy rainfall areas unless it's well - protected. If you're in such an environment, it's better to choose an IP65 fitting. For maintenance, check the light regularly for any signs of damage or wear. If there are any problems, you can take advantage of the 2 - year replacement warranty.
