These exterior MR16 recessed inground up lights are a great choice. They have an input voltage range of 12 - 25V DC / AC and require external control gear. The faceplate and housing are made of 316 stainless steel, ensuring durability. The lamp holder is MR16, suitable for a max 20W globe (globe not included). A plastic sleeve is included, which must be used when installing in concrete. The fitting slides into the sleeve without being attached. A 950mm cable is also provided. With an IP rating of IP67, they come with a 2 - year replacement warranty. Note: Must be installed by a licensed electrician. Use circular cable in junction to maintain the IP rating. For parallel and single connection, an appropriate IP68 connector is recommended. Ensure the IP rating suits your intended use to avoid issues.
Using these MR16 inground up lights is easy. First, make sure to read the installation instructions in the product box and have a licensed electrician do the installation. When installing in concrete, don't forget to use the included plastic sleeve. The fitting just slides into the sleeve. The lights work with a voltage range of 12 - 25V DC / AC, but you'll need external control gear. Remember, the globe is not included, so you'll have to buy a max 20W MR16 globe separately. For the best performance and to maintain the IP67 rating, use circular cable in the junction. If you're doing parallel or single connections, use an appropriate IP68 connector. To keep your lights in good shape, check them regularly for any signs of damage. If there are any problems within 2 years, you can get a replacement as per the warranty. Always ensure the IP rating of the product is right for where you want to use it.
