These exterior MR16 recessed inground up lights are a great choice for your outdoor lighting needs. They operate on an input voltage range of 12 - 25V DC / AC and require external control gear. The faceplate and housing are made of either 316 stainless steel or solid copper, ensuring durability. The lamp holder is MR16, suitable for a max 20W globe (globe not included). A plastic sleeve is included, which must be used when installing in concrete. The fitting slides into the sleeve without being attached. A 950mm cable is also provided. With an IP rating of IP67 and a 2 - year replacement warranty, these lights offer reliability. Note: Must be installed by a licensed electrician. Use circular cable in junction to maintain the IP rating. Ensure the IP rating suits your intended use to avoid issues.
Using these MR16 inground up lights is quite straightforward. First, make sure to have a licensed electrician install them as required. When installing in concrete, don't forget to use the included plastic sleeve. The fitting simply slides into the sleeve. Connect the 950mm cable, and use circular cable in the junction to keep the IP rating intact. If you're doing parallel or single connections, use an appropriate IP68 connector. Remember, the globe is not included, so you'll need to buy one that fits the MR16 lamp holder and has a maximum power of 20W. For maintenance, keep the lights clean and check the connections regularly. If there are any problems, you can take advantage of the 2 - year replacement warranty. Also, always ensure the IP rating of the lights matches your intended use to avoid disappointment and warranty issues.
