BULK: Round LED Bulkhead Lights IP66 IK10

These exterior LED bulkhead lights are a great choice for outdoor lighting. They operate on an input voltage range of 220 - 240V AC 50/60Hz. The housing is made of polycarbonate, and the frosted diffuser and back plate are made of PC. With 63pcs SMD2835 LED chips, they offer good lighting. The power factor is 0.5, and the CRI is over 80. They can work in an ambient temperature range from -20 to 45°C. The double - insulated wiring is TUV approved. They have an IP66 rating and an IK10 impact rating for vandal resistance. The large terminal holes make connection easy. They are suitable for 2 - way switching and can be used with PIR or Microwave sensors. They come with a 3 - year replacement warranty. A licenced electrician must install them, and an installation instructions sheet is provided in each product box. They are not recommended for harsh weather or heavy rainfall environments unless protected; IP65 fittings are better for such conditions. Make sure the IP rating matches your intended use to avoid issues.

Using these LED bulkhead lights is simple. First, have a licenced electrician install them following the instructions in the product box. The large terminal holes make it easy to connect the wires. You can use them with 2 - way switching or pair them with PIR or Microwave sensors according to your needs. For maintenance, keep the lights clean. Wipe the frosted diffuser and back plate gently with a soft, dry cloth. Avoid using abrasive materials. Be aware that these lights are not suitable for harsh weather or heavy rainfall areas unless they are properly protected. If you're in such an environment, consider using IP65 fittings instead. The lights come with a 3 - year replacement warranty, so if you have any problems, you can get a replacement within this period.