These exterior LED bulkhead lights are a great choice for your outdoor lighting needs. They operate on an input voltage range of 220 - 240V AC 50/60Hz. The housing is made of polycarbonate, and the frosted diffuser and back plate are PC. There are 63pcs SMD2835 LED chips. With a power factor of 0.5 and a CRI greater than 80, they provide good lighting. They can work in an ambient temperature from -20 to 45°C. The double - insulated wiring is TUV approved. They have an IP66 rating and an IK10 impact rating for vandal resistance. The large terminal holes make connection easy. They are suitable for 2 - way switching and can be used with PIR or Microwave sensors. They come with a 3 - year replacement warranty. A licenced electrician must install them, and an installation instructions sheet is in each box. They are not recommended for harsh weather or heavy rainfall unless protected; IP65 fittings are better for such conditions. Make sure the IP rating fits your use to avoid issues.
Using these exterior LED bulkhead lights is easy. First, find a suitable location for installation. Remember, you need a licenced electrician to do the installation as there's an installation instructions sheet in each box. Connect the wires through the large terminal holes for a smooth connection. You can use them with 2 - way switching or pair them with PIR or Microwave sensors as you like. For the best performance, use them in an environment where the temperature is between -20 and 45°C. As for maintenance, since they have an IP66 rating and IK10 impact rating, they're quite durable. But in harsh weather or heavy rainfall, it's better to use IP65 fittings or provide proper protection. If you have any problems within 3 years, you can get a replacement according to the warranty.
