These LED oyster lights have an input voltage range of 220 - 240V AC 50/60Hz and a constant - current inbuilt driver with an output voltage of 60 - 80V DC. They feature a metal base and a PS diffuser. SMD2835 LED chips are used, offering a power factor greater than 0.9. The color temperature is changeable among 3000K, 4000K, and 5000K, with a CRI of 80. They can work in an ambient temperature from - 20 to 40°C. Suitable for dimming, 2 - way switching, and use with 3 - wire motion or microwave sensors. The IP rating is IP44, and there's a 3 - year replacement warranty. However, changes in appearance due to climate aren't covered. Must be installed by a licensed electrician. Tested and recommended dimmers include CLIPSAL, HPM, and DIGINET models. Check with a licensed electrician for min and max dimmer load; may be compatible with other untested dimmers.
Using these LED oyster lights is quite simple. First, make sure you have a licensed electrician install them as required. The installation instructions are provided in each product box. These lights can be used for dimming, 2 - way switching, and work well with 3 - wire motion or microwave sensors. You can change the color temperature according to your needs, choosing from 3000K, 4000K, or 5000K. Keep in mind that the ambient temperature should be between - 20 and 40°C. When it comes to dimmers, use the tested and recommended ones like those from CLIPSAL, HPM, and DIGINET. Check with a licensed electrician about the minimum and maximum dimmer load. Regarding maintenance, these lights are quite durable with a 3 - year replacement warranty. But be aware that changes in appearance due to climate conditions aren't covered by the warranty.
