This FIREFLY01A LED gimbal recessed downlight offers great lighting flexibility. It operates on an input voltage of 220 - 240V and comes with an external constant - current LED driver. With a 20 - degree tilt, it can direct light where you need it. The housing is made of plastic and aluminium for durability, and it has a clear PC diffuser and a plastic faceplate. It uses 1pc COB LED chip, and you can easily change the colour temperature between 3000K, 4000K, and 5700K via the CCT switch on the driver. It has a CRI of over 80 and a power factor greater than 0.9. The 0.6m flex and plug are convenient. It can work in an ambient temperature range of - 20 to 40°C. This downlight is suitable for dimming, 2 - way switching, and can be used with PIR and microwave sensors. It has an IP20 rating, double insulation, and is IC rated. You also get a 3 - year replacement warranty. Tested and recommended dimmers include CLIPSAL 32E450TM, 32ELEDM, HPM CAT400T, and DIGINET MEDM, MMDM/RT. Always check with a licensed electrician for dimmer load details.
Using your FIREFLY01A LED gimbal recessed downlight is easy. First, make sure to have it installed by a licensed electrician as there are installation instructions in each product box. Once installed, you can adjust the tilt up to 20 degrees to direct the light as you like. To change the colour temperature, use the CCT switch on the driver to choose between 3000K, 4000K, and 5700K. You can also dim the light, but remember to check with a licensed electrician for the minimum and maximum dimmer load. This downlight can work with PIR and microwave sensors and is suitable for 2 - way switching. When it comes to maintenance, keep the light clean by gently wiping the diffuser and faceplate with a soft, dry cloth. Avoid using harsh chemicals. Make sure the ambient temperature stays between - 20 and 40°C. If there are any issues, you have a 3 - year replacement warranty.
