These downlights are a great lighting solution. The input voltage is 220 - 240V AC. They come with an inbuilt constant current LED driver. The housing and heatsink are made of plastic and aluminium, while the diffuser is PC. You get Tri - CCT (3000K/4000K/6000K) in one fitting, controlled by a rear switch. With a CRI of 80 and a power factor of 0.9, they offer good lighting quality. It has a 1m flex and plug. The ambient temperature range is -20 to 40°C. They are suitable for dimming and 2 - way switching, and have an IP20 rating. They are double - insulated and IC rated, with a 3 - year replacement warranty. A licenced electrician must install them (installation instructions are in each box). Tested and recommended dimmers include CLA (Trailing Edge: VELA), Clipsal (Universal: 32E450UDM, 31E2PUDM; Trailing Edge: 32ELEDM - WE, 32E450TM), HPM (Trailing Edge: CAT250T, CAT400T), and Diginet (LED Smart: MEDM). Check with a licenced electrician for Min and Max dimmer load, and they may work with other untested dimmers.
Using these downlights is easy. First, make sure you have a licenced electrician install them as per the instructions in the box. Once installed, you can use the rear switch to select between the three different color temperatures (3000K, 4000K, 6000K). You can also dim the lights using one of the recommended dimmers. When it comes to maintenance, keep the lights clean by gently wiping them with a soft, dry cloth. Avoid using abrasive materials. Make sure the ambient temperature stays between -20 and 40°C. If you want to change the dimmer, always check with a licenced electrician for the correct load. And remember, these lights come with a 3 - year replacement warranty, so if there are any issues, you're covered.
