MARINA: Exterior LED Up/Down Surface Mounted Wall Lights IP65

These exterior LED wall lights are surface-mounted and can light up or down. They have a wide input voltage range of 100 - 240V AC 50/60Hz. The driver has an output of 13.5 - 22V and an input current of 0.034A, with an output current of 300mA. The inrush current is 1.2A. The housing is made of aluminium, the diffuser and bracket are PC, and it uses 6pcs 3030 LED chips. With a power factor greater than 0.5, it can work in an ambient temperature from -20 to 50°C. It's suitable for 2 - way switching and can be used with PIR or Microwave sensors. It has an IP65 rating, and the back plate is 92.5 x 50.5mm. There's a 3 - year replacement warranty. A licenced electrician must install it, and an installation instructions sheet is provided in each box. Make sure to choose the right IP rating for your use to avoid issues.

Using these MARINA exterior LED wall lights is easy. First, make sure you have a licenced electrician install them as required by the warranty. The lights are suitable for 2 - way switching and can be used with PIR or Microwave sensors, which you can set up according to your needs. They work well in an ambient temperature between -20°C and 50°C, so you don't have to worry about most weather conditions. For maintenance, simply clean the PC diffuser and bracket gently with a soft cloth. The aluminium housing is durable and doesn't need much special care. Remember, always check the IP rating to ensure it's suitable for your intended use. And if you encounter any problems within 3 years, you can get a replacement under the warranty.