HATHOR: Exterior LED Dark Grey Rectangular Surface Mounted Wall Light IP54

This exterior LED wall light in dark grey offers a sleek rectangular design and is surface-mounted. It has an input voltage range of 100 - 240V AC 50/60Hz and comes with an inbuilt constant current driver. The driver has an output voltage range of 18 - 42V, input current of 0.065A, and output current of 300mA. The housing and heatsink are made of powder-coated aluminium, with a PC diffuser and back plate. It has a power factor greater than 0.5 and can work in an ambient temperature of -20 to 50°C. It's not suitable for dimming but is good for 2-way switching and can be used with PIR or Microwave sensors. It has an IP rating of IP54 and comes with a 3-year replacement warranty. A licenced electrician must install it, and installation instructions are in each box. It's not recommended for harsh weather or heavy rainfall unless protected; IP65 fittings are better for such conditions. Choose the right IP rating for your needs to avoid issues.

Using this HATHOR wall light is easy. First, make sure to have a licenced electrician install it according to the instructions in the box. Connect it to a power source within the 100 - 240V AC 50/60Hz range. It can be used with 2 - way switching or with PIR or Microwave sensors. Note that it's not suitable for dimming. For maintenance, keep the light clean. Wipe it gently with a soft cloth. Avoid using harsh chemicals. This light is not suitable for harsh weather or heavy rainfall unless it's properly protected. If you're in such an environment, consider using an IP65 - rated fitting instead. Also, remember it comes with a 3 - year replacement warranty, so if there are any problems, you can get it replaced.