GLANS: Surface Mounted Exterior LED Wall Lights IP65

These exterior LED wall lights are surface-mounted and perfect for outdoor areas. With an input voltage range of 100 - 240V AC 50/60Hz and an output voltage of 13.5 - 22V, they offer stable performance. The housing and heat sink are made of aluminium, while the mounting bracket and diffuser are PC. It has 6 or 12 pieces of 3030 LED chips. The power factor is greater than 0.5. They can work in an ambient temperature from -20 to 50°C. Not suitable for dimming, but suitable for 2-way switching and can be used with PIR or Microwave sensors. They are IP65 rated and come with a 3-year replacement warranty. A licenced electrician must install them, and an installation instructions sheet is in each product box. Make sure the IP rating fits your intended use to avoid issues.

Using these exterior LED wall lights is quite simple. First, find a suitable outdoor location for mounting. Remember, they must be installed by a licenced electrician, and you'll find an installation instructions sheet in the product box to guide you through. Once installed, these lights are ready to provide reliable illumination. They're suitable for 2 - way switching, so you can control them easily from different places. You can also pair them with PIR or Microwave sensors for added convenience. Keep in mind that these lights are not suitable for dimming. As for the ambient temperature, they can work well from -20 to 50°C. To avoid any warranty problems, ensure that the IP65 rating is appropriate for your intended use. For maintenance, you can gently clean the surface of the lights with a soft, dry cloth from time to time. This will help keep them looking good and functioning properly.