This is an exterior surface - mounted bollard light. It operates within an input voltage range of 12 - 24V. The housing is made of aluminium and acrylic. It comes with a lamp holder for 1xMR16 (Max 20W), but the globe is not included. An external control gear is required. With an IP rating of IP54, it offers a 2 - year replacement warranty. It must be installed by a licenced electrician, and an installation instructions sheet is provided in each product box. These bollards are suitable for solid surfaces like concrete paths or sturdy timber decks. Use circular cable in the junction to maintain the IP rating. For parallel and single connections, an appropriate IP68 connector is recommended. It's not suitable for harsh weather or heavy rainfall unless protected; IP65 fittings are better for such conditions. Make sure the IP rating fits your intended use to avoid issues.
Using this bollard light is simple. First, ensure you have a licenced electrician install it as it's required for safety. Follow the installation instructions sheet that comes in the product box. Connect it to a power source within the 12 - 24V range. Since the globe is not included, you'll need to get a 1xMR16 (Max 20W) globe separately. For wiring, use circular cable in the junction to keep the IP54 rating. If you're doing parallel or single connections, an IP68 connector is a good choice. When it comes to maintenance, check the housing made of aluminium and acrylic regularly for any signs of damage. Don't use this light in harsh weather or heavy rainfall unless it's properly protected. If you're in such an environment, it's better to use IP65 fittings. Also, always make sure the IP rating of the product matches your usage needs to avoid warranty problems.
